GE DS200TCQCG1B DS200TCQCG1BFE RST Overflow extended Board
Description
| Manufacture | GE |
| Model | DS200TCQCG1B |
| Ordering information | DS200TCQCG1BFE |
| Catalog | Speedtronic Mark V |
| Description | GE DS200TCQCG1B DS200TCQCG1BFE RST Overflow extended Board |
| Origin | United States (US) |
| HS Code | 85389091 |
| Dimension | 16cm*16cm*12cm |
| Weight | 0.8kg |
Details
The DS200TCQCG1B GE RST Overflow Board is an extended input output circuit board populated with 24 jumpers and 3 40-pin connectors, 3 34-pin connectors and 1 16-pin connector. It is located in the in the R, S, and T cores in the General Electric MKV panel and its primary function is to take the digital output of the board and to convert it to current that drives the servo-valve by digital to analog converters and amplifiers.
IDs are assigned to all connectors for easy identification and placement. The jumpers on this board serve to enable the installer to configure the board for the exact needs of the site. When the original board is installed, the installer will review the information in the installation guide provided with the board. It contains a description of the jumpers and how the functionality of the b oard can change as the position of the jumpers change. It is best practice for the operator to work closely with the engineering staff at the facility so that the installer can set the jumpers to better meet the requirements of the facility. This is part of the drive installation procedure and might require some preinstallation communications between the installer and representatives from the site.
After installation, the jumpers stay in place and further configuration is not necessary. The only configuration necessary is to set the jumpers on the replacement board to match the jumper positions on the old board.
