GE DS200IPCSG1ABB IGBT P3 Snubber Board
Description
| Manufacture | GE |
| Model | DS200IPCSG1ABB |
| Ordering information | DS200IPCSG1ABB |
| Catalog | Speedtronic Mark V |
| Description | GE DS200IPCSG1ABB IGBT P3 Snubber Board |
| Origin | United States (US) |
| HS Code | 85389091 |
| Dimension | 16cm*16cm*12cm |
| Weight | 0.8kg |
Details
Product Description
The GE IGBT P3 Snubber Board DS200IPCDG1ABB features one 4-pin connector and screws for adjusting the insulated bipolar transistor (IGBT). The screws are adjusted by turning the screws with a screwdriver.
The GE IGBT P3 Snubber Board DS200IPCDG2A features one 4-pin connector and screws for adjusting the insulated bipolar transistor (IGBT). Before removing the old board, take notice where the board is situated and plan to install the replacement board in the same place. Also, note what cable is attached to the 4-pin connector and plan to connect the same cable on the new board to ensure you recieve the same functionality.
When disconnecting the cable make sure to grasp it from the connector at the end of the cable. If you pull the cable out by holding the cable portion of it, it is possible to damage the connection between the wires and the connector. Use one hand to hold the board in place and relieve the pressure on the board and with the other hand pull the cable out. Notice any cable routing inside the cabinet and plan to route the cable the same way after the new board is installed.
