-
ABB Advant Controller 31 – Series 90 Series 40 and 50
Description General setup rules： An ABB AC 31 system always includes an AC 31 central unit. There are three types of central units: - The 40 series central unit, with a local inputs / outputs extensions interface - The 50 series central unit, with a local inputs / outputs extensions interface a...Read more -
ABB REG216 System Generator and Generator Transformer Protection
Description Generators are the most complex and expensive single elements in a power system. The generator protection system must therefore be designed for maximum dependability and availability. Continuous and secure power delivery is the main objective for power utilities and their customers. ...Read more -
ABB Procontrol P13 Complete power plant control system
Description Originally introduced to the power generation market in 1982, ABB’s Procontrol P13 platform is now in its fourth decade of providing safe and reliable power plant operation worldwide in more than 500 units. Not many control systems can make the same claim, especially with the same qua...Read more -
ABB Procontrol P14 Complete power plant control system
Description ABB launched Procontrol™ P14 more than 35 years ago in 1977. Throughout its long life Procontrol P14 has proven to be one of the most reliable and efficient power plant automation systems on the market. With 500 installations in 46 countries all over the world it has a large, long-st...Read more -
ABB Symphony® Plus HR Series Control and I/O
Description ABB Ability™ Symphony® Plus is the new generation of ABB’s highly acclaimed Symphony family of distributed control systems – the world’s most widely used DCS in power generation and water management applications. In all, there are more than 7,000 Symphony DCS installations in operati...Read more -
ABB Symphony Plus SD Series Control and I/O
Description The SD Series includes a set of high-performance, scalable process controllers that support a plant’s total control requirements, from discrete and continuous, to batch and advanced control applications. Supported by a comprehensive range of I/O options, the SD Series delivers powerf...Read more -
ABB Bailey Net 90 and Infi 90 Controls
Description INFI-NET is a unidirectional, high-speed serial data highway shared by all INFI 90 OPEN nodes. INFI-NET provides sophisticated interfaces for data exchange. This process control unit interface is made up of state-of-the-art INFI 90 OPEN modules. INFI-NET is a unidirectional, high-spe...Read more -
ABB 800xA Operator Workplace for Advant Master DCS
Description Introduced in 2005, the System 800xA for Advant Master integrated the Advant Master system into System 800xA using the 800xA for Advant Master, 800xA for Safeguard and 800xA for AC 100 integration packages. It supports full integration with System 800xA features and components such a...Read more -
ABB Advant Controller 160 for Advant Master DCS
Description Advant Controller 160 is a scalable highly modular controller used within Advant OCS system for general applications which require high availability and redundancy. It is offering a full complement of control and communication functions and meets high requirements concerning performa...Read more -
ABB Advant® Controller 450 The proven process controller
Description Advant Controller 450 is a high-end process controller. Its high processing capacity and wide-ranging process and system communication capabilities make it the ideal choice for demanding applications, either standing alone or as part of a ABB Ability™ System 800xA with Advant® Master...Read more -
ABB S100 I/O for Advant Master DCS
Description The S100 I/O process interface modules for Advant Controller 400 series process controllers come with connection units, simplifying cable termination and keeping noise and destructive spikes away from the central electronics. S100 I/O is the central process interface for Advant Contr...Read more -
VIBRO IPC 704 Signal conditioner
Description The IPC 704 signal conditioner converts the chargebased signal from a piezoelectric-based transducer into a current or a voltage signal. This current or voltage signal is transmitted to the processing electronics via a standard 2-wire or 3-wire transmission cable. The current modulat...Read more -
VIBRO CE311 AND CE281 Piezoelectric Accelerometer
Description The CE311 piezoelectric accelerometer from Meggitt’s vibro-meter® product line is a vibration sensor designed for the monitoring and protection of machinery in harsh industrial environments and/or hazardous areas. The CE311 sensor features a symmetrical shearmode measuring element us...Read more -
VIBRO CE 110 CE6xx and PV6xx General purpose sensor
Description Meggitt’s Vibro-Meter® product line includes a wide range of cost-effective sensors for the monitoring of balance of plant (BOP) equipment such as compressors, gearboxes, motors, pumps and fans, as well as larger machinery such as hydro turbines. Our complete solutions for general-pu...Read more -
VIBRO CP 216 Piezoelectric Pressure Transducer
Description CP dynamic pressure sensors are qualified by major OEMs for gas turbine combustor pulsation monitoring. The CР series uses Meggitt’s acceleration compensation patented technology and reaches the highest sensitivity in the industry (over 750 pC/bar). Meggitt’s CP sensors h...Read more -
VIBRO TQ902/TQ912, EA902 and IQS900 Proximity Measurement Chains
Description Introduction: The TQ902/TQ912, EA902 and IQS900 form proximity measurement chains, from Meggitt’s vibro-meter® product line. TQ9xx-based proximity measurement chains allow contactless measurement of the relative displacement of moving machine elements, and provide an output signal p...Read more -
VIBRO TQ 402 Proximity Measuring System
Description This proximity system allows contactless measurement of the relative displacement of moving machine elements. It is particularly suitable for measuring the relative vibration and axial position of rotating machine shafts, such as those found in steam, gas and hydraulic turbines, as w...Read more -
VIBRO CA202 Piezoelectric Accelerometer
Description The CA202 is a piezoelectric accelerometer from Meggitt’s vibro-meter® product line. The CA202 sensor features a symmetrical shear mode polycrystalline measuring element with internal case insulation in an austenitic stainless steel case (housing). The CA202 piezoelectric acceleromet...Read more -
VIBRO VM600 Machinery Protection Systems (MPS)
Description Vibro-Meter has developed two configuration software packages for use with the VM600 series Machinery Protection Systems (MPS). The packages run under Windows 98/NT/2000/XP/2003 Server and are menu-driven for ease of use. MPS1 and MPS2 allow stand-alone configuration of MPC 4 and AMC...Read more -
EPRO MMS 6000 Machine Monitoring Systems
Description Component of the MMS 6000 Machine Monitoring System Slots for adaptation of signal pro‐ cessing periphery Monitors: 10xMMS 6xxx Logic card: e.g. MMS 6740 Interface card:e.g: MMS 6824 External connection to the pe‐ riphery via 25-pole Sub-D connectors System frame configuration via ha...Read more -
Emerson 6500 Machinery Health Monitor
Description Extend PlantWeb® with API 670 machinery protection monitoring Integrate machinery protection monitoring with DeltaV™ and Ovation™ automation systems in three easy steps Monitor your plant’s most critical rotating machines Gain real-time machinery health feedback integrated with proce...Read more -
Bently Nevada 3300 Asset Condition Monitoring
Description The 3300 System provides continuous, online monitoring suitable for machinery protection applications, and is designed to fully meet the requirements of the American Petroleum Institute’s API 670 standard for such systems. The system’s highly modular design consists of an Instrument ...Read more -
Bently Nevada 3500 Machinery Condition Monitoring
Description The 3500 System provides continuous, online monitoring suitable for machinery protection applications, and is designed to meet the requirements of the American Petroleum Institute’s API 670 standard for such systems. The system’s modular rack-based design includes the following compon...Read more -
EPRO Electrodynamic Velocity Sensor
Electrodynamic Velocity Sensor Mechanical velocity sensor for absolute vibration measurement of critical turbomachinery applications such as steam, gas and hydro turbines, compressors, pumps and fans to measure case vibration. Stock part list: PR9268/200-000 PR9268/201-000 PR9268/017-100 PR92...Read more -
EPRO Hall Effect Speed/Proximity Sensor
Hall Effect Speed/Proximity Sensor Non-contact Hall effect sensor designed for speed or proximity measurements on critical turbomachinery applications such as steam, gas and hydro turbines, compressors, pumps, and fans. Stock part list: PR9376/010-001 PR9376/010-011 PR9376/20 PR9376/S00-000 P...Read more -
EPRO 32mm Eddy Current Sensor
32mm Eddy Current Sensor Non-contact sensor designed for critical turbo machinery applications such as steam, gas and hydro turbines, compressors, pumps and fans to measure radial and axial shaft displacement: position, eccentricity and motion. Stock part list: CON011/916-120+PR6426/010-140 PR...Read more -
EPRO 16mm Eddy Current Sensor
16mm Eddy Current Sensor Non-contact sensor designed for critical turbomachinery applications such as steam, gas and hydro turbines, compressors, pumps and fans to measure radial and axial shaft dynamic displacement; position, eccentricity and speed/key. Stock part list: PR6424/000-100 PR6424/00...Read more -
EPRO 8mm Eddy Current Sensor
8mm Eddy Current Sensor Non-contact sensor designed for critical turbomachinery applications such as steam, gas and hydro turbines, compressors, gearboxes, pumps and fans to measure radial and axial shaft dynamic displacement; position, eccentricity and speed. Stock part list: PR6423/009-01...Read more
