news

Description 

Component of the MMS 6000 Machine Monitoring System

Slots for adaptation of signal pro‐ cessing periphery

Monitors: 10xMMS 6xxx

Logic card: e.g. MMS 6740

Interface card:e.g: MMS 6824

External connection to the pe‐ riphery via 25-pole Sub-D connectors

System frame configuration via hardware bridges, solder bridges and configuration of the Dip- switches

buildup of RS485 buslines for integration of all monitors

generation of a master-key si‐ gnal by a key- monitor at the 1st monitor slot

change over between closedcircuit and open- circuit mode via solder bridges

Applications

The system frame IMR 6000/00 is developed for general use in industrial applications where a reliable adaptation between electronic devices and plant devices is necessary.

With the system frame IMR 6000/00, an appropriate adaptation of the signalprocessing periphery like:

- alarm signas

- error signals

- connection results

- external signal

The system frame IMR 6000/00 offers substantial saving potential with the wiring complexity

Assembly and functionality

The system frame IMR 6000/00 is a component of the epro MMS 6000 machine monitoring system. This consists of a 19” card frame and comprises the following card slots at the front side:

• 10 monitor slots for MMS 6000 series

• 2 slots for adaptation of one logiccard e.g. MMS 6740

• 1 slot for connection of an interface card e.g. MMS 6830, MMS 6831, MMS 6824 or MMS 6825

The following Monitors are supported of the system frame IMR 6000/00 with their basic functions:

MMS 6110, MMS 6120, MMS 6125, MMS 6140, MMS 6210, MMS 6220, MMS 6310, MMS 6312, MMS 6410.

The 1st monitor slot at the system frame offers the possibility to imply a key monitor and to relay these key signal to the other monitors.

The rear of the system frame serves the purpose of:

• signal supply

• signal output for further processing

• parameterization of the system frame

The connection to the external periphery on the rear of the system frame is made by 25- pole SubD plugs

By integration of a corresponding interface card, if necessary, it`s possible to build up several RS485 buslines within one system frame. That`s the way to connect the monitors to one communication bus.

Configuration

For stand-alone operations of the sys‐ tem frame IMR 6000/00 no software configuration is necessary.

The parametrisation of the system frame must be realized in terms of hard‐ ware via bridges, solder bridges and Dip switches on the rear of the system frame.

The change over between open cir‐ cuit and closed circuit mode of the danger and alert alarms takes place for each monitor by solder bridges.

The parametrisation of the key si‐ gnals and the RS485 bus signals is realized via Dip switches on the rear of the IMR 6000/00.

Stock part list:

MMS3120/022-000
MMS3120/022-100
MMS3125/022-020
MMS3210/022-000
MMS6110
MMS6120
MMS6210
MMS6250
MMS6310
MMS6312
MMS6350
MMS6822
MMS6831
MMS6823
MMS6823A
MMS6410
SDM010
MMS6220
MMS6350/DP
MMS3311/022-000