news

Description
Transducer System
The 3300 XL 11 mm Proximity Transducer System consists of.
3300 XL 11 mm probe
3300 XL 11 mm extension cable
3300 XL 11 mm Proximitor@ Sensor1

The 3300 XL 11 mm Proximity Transducer System has a 3.94 V/mm (100 mV/mil) output for non-contacting vibration ond displacement measurements on fluid film bearing machines, The large 11 mm tip enables this transducer system to have a longer linear range compared to our standard 3300 XL 8 mm Transducer System, it is primarily used in the following applications where the longer linear range is necessary.

• Axial (thrust) position measurements
• Ramp differential expansion measurements on steam turbines
• Rod position or rod drop measurements on reciprocating compressors
• Tachometer and zero speed measurements
• Phase reference (Keyphasor) signals

The 3300 XL 11 mm Proximitor Sensor is designed to replace the 7200-series 11mm and 14 mm Transducer Systems. When upgrading from the 7200-seriessys system to the 3300 XL 11 mm system, every component must be replaced with 3300XL 11 mm components. in addition, the monitoring system must be updated. If using a 3500 Monitorng System, an updated version of the configuration software that lists the 3300 XL 11 mm Transducer System as a compatible option is required.

Proximitor Sensor
The 3300 XL 11mm Proximitor Sensor has the same advanced features found in the 3300 XL 8mm Proximitor Sensor, its thin design allows it to be mounted in either a high-density DlN-rail installation or a more traditional panel mount configuration. Improved RFl/EMl immunity allows the 3300 XL Proximitor Sensorto achieve European CE mark approvals without any special mounting considerations. This RFl immunity also prevents the transducer system from being adversely affected by nearby high frequency radio signals.SpringLoc terminal strips on the Proximitor Sensor require no special installation tools and facilitate faster, highly robust field wiring connections.

Proximity Probe and Extension Cable
The 3300 XL 11 mm probe comes in varying probe case configurations, including armored and unarmored 1/2-20, 5/8-18, M14*1.5 and M16 *15 probe threads. The reverse mount 3300 XL 11 mm probe comes standard with either ¾-24 or M10 X 1 threads. All components ofthe transducer system have gold-platedbrass ClickLoc connectors. ClickLoc connectors lock into place, preventing the connection from becoming loose. The patented TipLoc molding method provid a robust bond between the probe tip and the probe body. The probe cable is securely attached to the probe tip utilizing our patented CableLocr design that provides 330 N (75 lb) pull strength.

3300 XL Probes and Extension Cables can also be ordered with a FluidLoc cable option. This option prevents oil and other liquids from leaking out of the machine through the coble's interior. The connector protector option provides additional protection of the connectors in a humid or moist environment. Connector protectors are recommended for all installations and provide increased environmentol protection. Additionally, the 3300 XL 11mm probe comes standard with a locknut with predrilled safety wire holes

Notes:

• Proximitor Sensors are supplied by default from the factory calibrated to AlS1 4140 steel. Calibration to other target materials is available upon request.
• Silicone tape is also provided with each 3300 XL extension cable and can be used instead of connector protectors. Silicone tape is not recommended in applications where the probe-to-extension cable connection will be exposed to turbine oil.

Stock part list:

330703-000-080-10-02-00
330703-000-040-90-02-CN
330704-000-060-10-02-00
330730-040-00-00
330780-90-05
330703-000-040-10-02-05
330730-080-01-05
330709-000-070-10-02-00
330703-000-060-10-01-00
330704-000-100-10-02-00
330730-080-00-00
330730-080-03-05