products

5.1 THE ENGINEERING AND OPERATOR PERSONALITIES Each Universal Station (US) in a basic Enhanced Micro TDC 3000 system can be loaded with either the Universal Personality or the Operator Personality. When the Universal Personality is loaded in a station, both operations functions and engineering (configuration) functions can be performed. If the Operator Personality is loaded, only operations functions can be performed. The Universal Personality is used to implement (or configure) the system to meet the needs of its particular application. Implementation Guidelines for the Enhanced Micro TDC 3000 system are provided in Section 4. The Operator Personality is used by process operators and supervisors for day-to-day operation of the system and management of the process. It is also used by process engineers to verify operations and control strategies and to see the results of implementation activities that were accomplished in the Universal Personality. Detailed operating instructions for engineering functions within the Universal Personality are provided in several data-entry publications in the Implementation binders. Detailed operating instructions for the Operator Personality or operations functions within the Universal Personality are provided in the Process Operations Manual in the Process Operations binder. In that binder you should also find a plastic envelope that contains a pocket-sized Operator’s Digest. 5.1.1 How to Load and Change US Personalities The easiest way to change the personality of a US is through the Console Status display on another US. If there is only one US or if there are two USs, but neither one is running, a “bootload” procedure must be used to load a personality into a US.