Honeywell MU/MC-TAOX12 51304335-125 Analog Output Redundancy Board
Description
Manufacture | Honeywell |
Model | MU/MC-TAOX12 |
Ordering information | 51304335-125 |
Catalog | UCN |
Description | Honeywell MU/MC-TAOX12 51304335-125 Analog Output Redundancy Board |
Origin | USA |
HS Code | 3595861133822 |
Dimension | 3.2cm*10.7cm*13cm |
Weight | 0.3kg |
Details
Planning for Power and Grounding Compliance Guidelines for complying with required electrical codes are listed below: • All plant wiring (including power and signal cables) must be installed in accordance with the National Electrical Code (NEC), Canadian Electrical Code CEC), and all other local regulations. • Power wiring must conform to the local electrical code. Use of a qualified contractor and approval by the local wiring inspector ensures compliance to this code • Power wiring and signal cables installed by Honeywell (an optional service) will conform to the NEC or CEC. Upon your request, Honeywell will institute optional changes that will conform with the code, as well as adhere to local regulations and requirements. • Always install C200 power wiring in accordance with the Experion Control Hardware Installation Guide: − Preparing to Install the Power Supply − Installing the Power Supply − Preparing for Operation − Redundant Power Supply General Wiring Guidelines Circuit capacities Circuit capacity limits are governed by the NEC and CEC codes. Refer to these, and any other applicable local codes, to determine circuit capacities. Outlet capacities Outlet capacity limits are governed by the NEC and CEC codes. Refer to these, and any other applicable local codes, to determine outlet capacities. Indicate the number and location of these outlets on your system layout drawing when designing your system. Outlets should be marked so that nothing, other than a system component, is plugged into them.