GE IC698CHS117 Expansion Receiver Module
Description
| Manufacture | GE |
| Model | IC698CHS117 |
| Ordering information | IC698CHS117 |
| Catalog | PACSystems RX7i IC698 |
| Description | GE IC698CHS117 Expansion Receiver Module |
| Origin | USA |
| HS Code | 3595861133822 |
| Dimension | 3.2cm*10.7cm*13cm |
| Weight | 0.3kg |
Details
The RX7i rack can be used for all RX7i CPU and I/O configurations, Series 90™-70 I/O, and VME modules. Backplane connectors are spaced on 0.8" (20.3mm) centers to accommodate single-width RX7i modules, VME modules, and single-width Series 90-70 modules. Double-width Series 90-70 modules use two slots each. The rack accepts a power supply in slot 0 and a CPU in slot 1. The RX7i CPUs with Ethernet daughter card are double-width modules and use slots 1and 2. The remaining slots can be used for one of the following I/O combinations: fifteen single-width modules (with no doublewidth modules installed), eight double-width modules, or a combination of double-width and single-width modules. For a list of supported modules, see the PACSystems RX7i Installation Manual, GFK-2223. The power supply capacity may limit the number of modules in a rack. Integration of VME modules must be in accordance with guidelines which are described in the RX7i User's Guide to Integration of VME Modules, GFK-2235. RX7i racks are considered open equipment, and therefore must be installed in a protective enclosure rated IP54 or greater. Features Provides slot sensing for rack-type I/O modules. No jumpers or DIP switches on the I/O modules are required for addressing of these modules. Provides automatic daisy chaining of interrupt acknowledge and bus grant signals so no blank slot jumpers are required. Provides J2 backplane connectors to allow highspeed VME transfers of up to 64 data bits per cycle. Accepts plug-in RX7i AC power supplies Supports higher wattage power supply for highcurrent configurations. Supports an optional cooling fan assembly (required for IC698CPE020 or IC698CRE020).
\
