products

About the DS3800NGDC1A1A

The DS3800NGDC1A1A serves as a ground detection circuit board produced by General Electric, functioning as a hardware component within the Mark IV / Speedtronic product family. Tailored for gas and steam turbine control applications, this platform enables automatic execution of turbine startup and shutdown sequences. Furthermore, it supervises operational limits to guarantee the turbine unit consistently works under secure working conditions. Three transistors are integrated onto the DS3800NGDC1A1A board assembly.

Among the transistor set, two units are compact‑sized, while the third is a high‑power Motorola NPN transistor fitted with a dedicated heat sink for thermal dissipation. Four integrated circuits are populated across the PCB surface, together with six dedicated test points marked TP0 to TP5, where TP0 is assigned as the ground reference node. Positioned on one board edge is a single 3‑pin male header. Rotated 90 degrees relative to this header and mounted on opposing sides are a two‑position PCB terminal block and a five‑position PCB‑mount terminal strip. Additional hardware components fitted to the DS3800NGDC1A1A consist of:

spare plated‑through holes

snap‑fit PCB mounting fasteners

assorted capacitors, resistors and diodes

Seacor axial‑lead polyester DC foil‑film capacitors rated at 600V

25V 100μf specification capacitors

cement‑type wirewound resistors

nylon locating pins