GE DS200EXDEG1A DS200EXDEG1AEA Excitation Control Board
Description
| Manufacture | GE |
| Model | DS200EXDEG1A DS200EXDEG1AEA |
| Ordering information | DS200EXDEG1A DS200EXDEG1AEA |
| Catalog | MARK V |
| Description | GE DS200EXDEG1A DS200EXDEG1AEA Excitation Control Board |
| Origin | USA |
| HS Code | 3595861133822 |
| Dimension | 3.2cm*10.7cm*13cm |
| Weight | 0.3kg |
Details
About DS200EXDEG1AEA
The DS200EXDEG1AEA de-excitation control card is factory-produced and supplied exclusively for GE’s Mark V turbine control platform. Its functional positioning carries dual categorization: it operates universally as an excitation control module within the Mark V lineup, while also serving specialized duties as a dedicated de-excitation control unit.
This printed circuit card is an upgraded variant built upon the base DS200EXDEG1 mainboard. It incorporates two rounds of functional performance upgrades alongside one layout and circuitry drawing revision compared to the original base model.
Hardware Specifications & Operation Guidelines
Key built-in components of the GE DS200EXDEG1A de-excitation control board include:
- A pair of 34-pin interface ports
- Two 10-pin connectors
- Five status indicator light-emitting diodes
- Eight capacitance units
- Circuit test probe terminals
- Wiring terminal blocks
Multiple thermal radiators are pre-mounted on the PCB to dissipate heat generated by active electronic parts. Without these cooling structures, overheating would degrade onboard components and trigger early breakdowns of the full Mark V drive system. A vertical clearance of four inches above the radiators is mandatory to maintain unobstructed airflow for efficient heat evacuation.
This space requirement restricts the available mounting slots inside the drive cabinet. The recommended replacement practice is to record the original installation position of the faulty unit and fit the new board into the identical slot. Extra caution is needed during disassembly, as the card’s combined weight with attached heat sinks makes removal cumbersome. Per GE’s official operation manuals, the proper removal procedure requires one hand to unscrew fasteners at each board corner, while the other hand steadily supports the PCB to avoid drops or impact damage.
The integrated LED array delivers real-time feedback on internal processing status. Unlit signal lights signal circuit malfunctions or operational faults. Technicians can conduct targeted circuit diagnostics via labeled test points distributed across the board. Every test terminal bears a unique identifier formatted as "TP + number", with typical examples including TP1, TP3 and TP6 visible on the card surface.














