products

Power Requirements INPUT VOLTAGE RANGE (REDUNDANT) 24 V dc +5%, -10% CONSUMPTION 7 W (maximum) at 24 V dc HEAT DISSIPATION 7 W (maximum) at 24 V dc Vibration 0.75 g (5 to 200 Hz) Calibration Requirements Calibration of the module is not required. Regulatory Compliance ELECTROMAGNETIC COMPATIBILITY (EMC) European EMC Directive 89/336/EEC EN 50081-2 Emission standard EN 50082-2 Immunity standard IEC 61000-4-2 ESD Immunity Contact 4 kV, air 8 kV IEC 61000-4-3 Radiated Field Immunity 10 V/m at 80 to 1000 MHz IEC 61000-4-4 Electrical Fast Transient/Burst Immunity 2 kV IEC 61000-4-5 Surge Immunity 2kV on ac and dc power lines; 1kV on I/O and communications lines IEC 61000-4-6 Immunity to Conducted Disturbances 10 V IEC 61000-4-8 Power Frequency Magnetic Field Immunity 30 A/m IEC 61000-4-11 Voltage Dips, Short Interruptions and Voltage Variations Immunity Regulatory Compliance (Cont.) PRODUCT SAFETY European Low Voltage Directive 73/23/EEC PRODUCT CERTIFICATION Underwriters Laboratories (UL) UL/UL-C listed as suitable for use in UL/UL-C listed Class I, Groups A-D; Division 2; temperature code T4 enclosure based systems. The modules are also UL and UL-C listed as associated apparatus for supplying nonincendive communication circuits for Class I, Groups A-D, Division 2 hazardous locations when connected to specified I/A Series processor modules as described in the I/A Series DIN Rail Mounted FBM Subsystem User’s Guide (B0400FA). Communications circuits also meet the requirements for Class 2 as defined in Article 725 of the National Electrical Code (NFPA No.70) and Section 16 of the Canadian Electrical Code (CSA C22.1). Conditions of use are as specified in the I/A Series DIN Rail Mounted FBM Subsystem User’s Guide (B0400FA). CENELEC CENELEC (DEMKO) certified as EEx nA IIC T4 for use in CENELEC certified Zone 2 enclosure based systems. The modules are CENELEC certified as associated apparatus for supplying non-incendive field circuits for Zone 2, Group IIC, potentially explosive atmospheres when connected to specified I/A Series processor modules as described in the I/A Series DIN Rail Mounted FBM Subsystem User’s Guide (B0400FA). EUROPEAN UNION COMPLIANCE Meets all applicable European Union directives including the Explosive Atmospheres (ATEX) directive 94/9/EC, and bears the CE mark.