page_banner

products

Best IS200BICLH1AFD Supplier - GE DS200TCPDG1B DS200TCPDG1BCC Power Distribution Module – RuiMingSheng

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm for the long-term to create jointly with consumers for mutual reciprocity and mutual reward for Invensys Triconex 4000094-310 , TU844 3BSE021445R1 MTU , TQ412 111-412-000-012 proximity sensor , Through more than 8 years of business, we have accumulated rich experience and advanced technologies in the production of our products.
Best IS200BICLH1AFD Supplier - GE DS200TCPDG1B DS200TCPDG1BCC Power Distribution Module – RuiMingSheng Detail:

Description

Manufacture GE
Model DS200TCPDG1B
Ordering information DS200TCPDG1BCC
Catalog Speedtronic Mark V
Description GE DS200TCPDG1B DS200TCPDG1BCC Power Distribution Module
Origin United States (US)
HS Code 85389091
Dimension 16cm*16cm*12cm
Weight 0.8kg

Details

The DS200TCPDG1BCC is a power distribution circuit board developed by General Electric. The fuses, LED and power distribution connector and cables are rated at 125 VDC and is located in the PD core in the MKV panel. This board features 8 toggle switches, 36 fuses and 4 signal wire terminals along with 36 OK LEDs and 1 10-pin connector. The fuses on this board are housed in black plastic containers that obstruct the view of the fuse inside.

This housing also protects the fuses from damage. The board is populated with 36 green OK LEDs that indicate that the fuse is operating correctly. When replacing the fuse, make sure you use a fuse that is the exact type and rating as the fuse it is replacing. The written information that came with the board describes the type and rating of the fuse you must use. It is best practice to keep on hand a supply of the fuses you need for the board to reduce the downtime needed to replace the fuse and restart the drive.

The GE Power Distribution Board DS200TCPDG1B features 8 toggle switches, 36 fuses, and 4 signal wire terminals. It also has 36 OK LEDs and 1 10-pin connector. The OK LEDs are a quick method for the operator to understand if any of the 36 fuses on the board are blown.

When the LEDs are lit, it means that the fuses are operational and all circuits on the board are functioning. When the LEDs are off, the fuse is blown and it must be removed and a new fuse must be installed. The board also is populated with 2 red LEDs that indicate that a problem with the board exists and further diagnosing is required to determine the problem.

The fuse housings are black plastic and the operator is unable to see the state of the fuse. However, a quick glance at the OK LEDs provide the necessary information. Each fuse has an ID assigned to it. The ID is prefixed with FU followed by a number. For example, one fuse holder has the ID FU1, and another has the ID FU2, and another has the ID FU3.

The four signal wire terminals are used to connect copper signal wires from other components in the board. To disconnect a signal wire from the terminal, use a screwdriver to loosen the retention screw. Pull the wire out of the terminal and move it to one side. To install a signal wire insert the copper end into the terminal and tighten the retention screw with a screwdriver.


Datasheet link


Product detail pictures:

Best IS200BICLH1AFD Supplier - GE DS200TCPDG1B DS200TCPDG1BCC Power Distribution Module – RuiMingSheng detail pictures


Related Product Guide:

owing to excellent assistance, a variety of top of the range items, aggressive costs and efficient delivery, we take pleasure in a very good standing amongst our shoppers. We've been an energetic corporation with wide market for Best IS200BICLH1AFD Supplier - GE DS200TCPDG1B DS200TCPDG1BCC Power Distribution Module – RuiMingSheng , The product will supply to all over the world, such as: Cape Town, Mombasa, Qatar, "Good quality, Good service " is always our tenet and credo. We take every effort to control the quality, package, labels etc and our QC will check every detail during producing and before shipment. We are willing to establish long business relationship with those who seek the high quality products and good service. We have set up a wide sales network across European countries, North of America, South of America, Middle East, Africa, East Asia countries.Please contact us now, you will find our professional experience and high quality grades will contribute to your business.
  • The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Alexander from Nairobi - 2017.08.21 14:13
    This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
    5 Stars By Sahid Ruvalcaba from UAE - 2018.07.12 12:19

    Send your message to us: