page_banner

products

Best 84145-01 (78462-01) Suppliers - Bently Nevada 330850-50-05 3300 XL 25 mm Proximitor Sensor – RuiMingSheng

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Triconex 4000103-510 Output Cable Assy , Abb Ci851k01 3bse018101r1 , Redundant fault-tolerant control system , Quality is factory's life , Focus on customers' demand is the source of company survival and development, We adhere to honesty and good faith working attitude, looking forward to your coming !
Best 84145-01 (78462-01) Suppliers - Bently Nevada 330850-50-05 3300 XL 25 mm Proximitor Sensor – RuiMingSheng Detail:

Description

Manufacture Bently Nevada
Model 330850-50-05
Ordering information 330850-50-05
Catalog 3300 XL
Description Bently Nevada 330850-50-05 3300 XL 25 mm Proximitor Sensor
Origin United States (US)
HS Code 85389091
Dimension 16cm*16cm*12cm
Weight 0.8kg

Details

Description
The 3300 XL 25 mm Transducer System consists of a separate 25 mm probe, an extension cable, and a 3300 XL 25 mm Proximitor  Sensor. The 0.787 V/mm (20 mV/mil) output gives this system a linear range of 12.7 mm (500 mils). Based on this linear range, the 3300 XL 25 mm Transducer System is suitable for measuring differential expansion (DE) on mid-size to large steam turbine generators caused by the difference in growth rates between the turbine rotor and the machine stator (casing).

Measuring Differential Expansion(DE)
The Differential Expansion measurement is made by two proximity transducers observing a collar or ramp some distance from the thrust bearing. Typical transducer mounting arrangements are:
• Two transducers observing the same side of a collar.
• Two complementary input transducers observing opposite sides of a collar, effectively doubling the measurable DE range.
Two transducers with at least one transducer viewing a ramp on a rotor and the second transducer viewing either a separate ramp or a different location on the rotor to compensate for radial movement. This arrangement adds some error to the measurement, but can measure a longer total DE distance than the complementary measurement.
The criteria for selecting a mounting method are the size of the available target, the expected amount of rotor axial movement and the type of DE target that exists in the machine (collar versus ramp). If sufficient collar height is available, two transducers observing the same side of a collar is the preferred
configuration. These two transducers provide redundant measurements.

System Compatibility
The 3300 XL 25 mm probe comes in a large variety of case configurations to physically replace all standard 7200 25 mm, 7200 35 mm and 25 mm DE Integral transducer systems (including side and rear exit probes). The Proximitor Sensor also has an output that is identical to that of the 7200 and 25 mm DE Integral systems, allowing customers to upgrade without requiring any changes in the
monitor configuration. When upgrading from previous systems, every transducer system component (probe, extension cable, and Proximitor Sensor) must be replaced with 3300 XL 25 mm components.


Datasheet link


Product detail pictures:

Best 84145-01 (78462-01) Suppliers - Bently Nevada 330850-50-05 3300 XL 25 mm Proximitor Sensor – RuiMingSheng detail pictures


Related Product Guide:

"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization to the long-term to build together with shoppers for mutual reciprocity and mutual advantage for Best 84145-01 (78462-01) Suppliers - Bently Nevada 330850-50-05 3300 XL 25 mm Proximitor Sensor – RuiMingSheng , The product will supply to all over the world, such as: Sudan, Rwanda, Romania, With the development and enlargement of mass clients abroad, now we've set up cooperative relationships with many major brands. We've our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the "quality first, customer first, We are provideing high-quality, low-cost items and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.
  • The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By Hedda from French - 2017.09.26 12:12
    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Susan from Salt Lake City - 2018.05.22 12:13

    Send your message to us: