products

Description
The 3500/15 AC and DC Power Supplies are half-height modules and must be installed in designated slots on the left side of the rack. The 3500 rack can contain one or two power supplies with any combinations of AC and DC. Either supply can power a full rack.

When two power supplies are installed in a rack, the one in the lower slot acts as the primary supply, and the other in the upper slot acts as the backup supply. If installed, the second supply is the backup for the primary one.

Removing or inserting either power supply module does not disrupt operation of the rack as long as a second power supply is installed. The 3500/15 AC and DC Power Supplies accepts a wide range of input
voltages and converts them to voltages acceptable for use by other 3500 modules. The following power supplies are available with the 3500 Series Machinery Protection System:

l Universal AC Power
l High Voltage DC Power Supply
l Low Voltage DC Power Supply
The Universal AC Power Supply and PIM (Power Input Module) are not compatible with the Legacy 3500 AC Power Supply, High Voltage AC PIM and Low Voltage AC PIM.

The High Voltage and Low Voltage DC Power Supplies and PIM(Power Input Module) are NOT compatible with the Legacy 3500 High Voltage and Low Voltage DC Power Supplies and PIMs.

Ordering Information
For the detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide (108M1756) available from Bently.com.

3500/15 Power Supply Module
3500/15 - - AA- BB- CC

A: Power Supply Type (Top Slot)
0 1 Low Voltage ac (85 to 132Vac rms)
0 2 High Voltage ac (175 to 264Vac rms)
0 3 High Voltage dc (88 to 140Vdc)
0 4 Low Voltage dc (20 to 30Vdc)

B: Power Supply Type (Bottom Slot)
0 0 No supply (use when only one supply is required)
0 1 Low Voltage ac (85 to 132 Vac rms)
0 2 High Voltage ac (175 to 264 Vac rms)
0 3 High Voltage dc (88 to 140 Vdc)
0 4 Low Voltage dc (20 to 30 Vdc)

C: Agency Approval Option
0 0 None
0 1 CSA/NRTL/C
0 2 ATEX/CSA (Class 1, Zone 2)