5501-471 Supplier - Woodward 9907-205 Hand Held Programmer – RuiMingSheng
5501-471 Supplier - Woodward 9907-205 Hand Held Programmer – RuiMingSheng Detail:
Description
| Manufacture | Woodward |
| Model | 9907-205 |
| Ordering information | 9907-205 |
| Catalog | Hand Held Programmer |
| Description | Woodward 9907-205 Hand Held Programmer |
| Origin | United States (US) |
| HS Code | 85389091 |
| Dimension | 16cm*16cm*12cm |
| Weight | 0.8kg |
Details
The ProAct control system is designed to control the speed of engines in mechanical drive or generator set service. The electric powered ProAct actuator has 75° of rotation and is designed for direct drive of the butterfly valve on gas engines, and through linkage the racks on diesel engines.
Actuators are available in different sizes to fit specific control demands. In most cases, the ProAct II actuator will be used. The ProAct II provides 6.8 J (5.0 ft-lb) of work (transient) and 2.7 N·m (2.0 lb-ft) of torque. The ProAct I is extremely fast and provides 3.4 J (2.5 ft-lb) of work (transient) and 1.4 N·m (1.0 lb-ft) of torque at steady state. ProAct I controls may be operated on nominal 12 Vdc systems. ProAct II controls require nominal 24 Vdc supply.
Larger output ProAct III and ProAct IV controls are available. Information on these actuators is in manual 04127. The ProAct Digital Speed Control includes an input for a 4 to 20 mA remote speed reference setting, an internal speed reference for local control of speed, and an auxiliary voltage input for load-sensor connection in load-sharing applications.
A fuel limiting version is also available. The ProAct control system includes:
a ProAct Digital Speed Control
an external 18–32 Vdc (24 Vdc nominal) power source for Model II or a 10– 32 Vdc power source for Model I
a speed-sensing device (MPU)
a ProAct I or ProAct II actuator to position the fuel rack
a hand held terminal for adjusting control parameters
an optional load sensing device
The ProAct Digital Speed Control (Figure 1-2) consists of a single printed circuit board in a sheet metal chassis. Connections are via two terminal strips and a 9- pin J1 connector.
The control chassis has an aluminum shield to protect the circuits from electromagnetic interference (EMI) and electrostatic discharge (ESD).
The ProAct II control requires 18–32 Vdc (24 Vdc nominal) uninterrupted power supply, with 125 watts as the maximum power consumption at rated voltage. ProAct I requires 8–32 Vdc (12 or 24 Vdc nominal) uninterrupted power supply with 50 W as the maximum power consumption at rated voltage.
ProAct actuators are designed to directly link to the butterfly in the gas engine carburetor. The control can be programmed to have variable gain to compensate for the variable gain characteristics of carbureted gas engines.
Datasheet link
Product detail pictures:
Related Product Guide:
We aim to find out high quality disfigurement in the generation and provide the most effective services to domestic and abroad clients wholeheartedly for 5501-471 Supplier - Woodward 9907-205 Hand Held Programmer – RuiMingSheng , The product will supply to all over the world, such as: Borussia Dortmund, Salt Lake City, Russia, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.
By Carol from Estonia - 2018.09.29 13:24
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Nicci Hackner from Poland - 2018.06.18 17:25
